Fagor 5HA-200 LX Guide D'utilisation Et D'entretien page 9

2. INSTALLATION AND ASSEMBLY
2.1.
UNPACKING
1. Cut the plastic film covering the entire package.
2. Carefully remove all the oven's protective elements: top cover, edge protection
and polystyrene base.
With respect to the conservation of the environment, we recommend you follow the
advice given in section "6. Environmental Note".
2.2.
CONNECTION TO THE ELECTRICAL MAINS
a
Free-Standing Ovens
1. The measurements of the furniture unit in which
the oven is to be mounted must coincide with
those indicated in the diagrams, depending on
whether the unit is wall-mounted or floor-based.
5HA-196 X
9
-Figure 1-