Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Grease filters
Carbon filter
Lighting
B
EN 8
Removing the grease filter
Switch off the electricity! Remove the plug from the socket or switch
the electricity off at the mains. Pull the grease filter towards you and tilt
it downwards at the front.
Replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
• Remove the grease filter.
• Attach the carbon filters to the motor.
• Replace the grease filter.
Note:
• Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• The carbon filter needs to be replaced at least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
Changing the light bulbs
Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs ensure they are cooled down.
• Remove the light glass by lifting it upwards with a small screwdriver
or something similar.
C
• Replace the globe with a new globe of the same wattage.
Warning! Follow package directions and do not touch new light
with bare hands.
• Replace the light glass (clicks into position).
If the lights do not work, make sure that the lamps are fitted
properly into their housings before you call for technical assistance.
Publicité
