Vermeiren Albatros Mode D'emploi page 19

1
2
2
1
7. Remove the safety spindle (locking pin) from the
bottom end of the pole by gently pressing the button
at the head of the spindle. The safety spindle can
now be removed easily.
L
8. WARNING: Risk of injury - Once the pole is
unlocked, its own weight can cause
considerable downward forces to be
Pull out the standing position safety (traction screw)
until the pole is released and can be tilted. The pole
can now be tilted forwards.
Tip the pole as far as possible forward.
L
WARNING: Risk of injury - Make sure that
9.
the safety spindle is correctly inserted.
Fix the pole in place by pushing the safety spindle at
the end of the pole in with the pushbutton depressed
until its other end clearly protrudes. Release the
pushbutton on the safety spindle and check that it
cannot be pulled out again.
Page 17
Dismantle the
4.
(motor) from the cantilever
arm by removing
locking pin (1).
Move the actuator to the
5.
bottom position and place
the actuator in the black
clip (2).
Move the cantilever arm to
6.
the bottom position (1).
Fasten the pen on the top
end of the pole in the hole
of the cantilever arm (2).
exerted.
EN
Albatros
2010-12
actuator
the