Assembly Or Dismantling - Vermeiren Albatros Mode D'emploi

N
3.2

Assembly or dismantling

3.2.1 Unpacking
L
WARNING: Risk of injury - After unpacking and before further assembly, always
first confirm that the emergency stop (the red pushbutton on the control box) is
pressed in.
The patient hoist packaging has been selected to provide the best possible protection during
transport.
3.2.2 Assembly
L
WARNING: Risk of clamping - Take care that no body parts and wires get trapped,
crushed or cut during assembly.
Take the patient hoist out of the box and check that
1.
all the items have been delivered and that the
individual parts do not have any visible defects. If
there is any damage, please contact your sales
office.
Before assembly, put on the caster brakes to make
2.
sure that the lift cannot be moved unintentionally.
Push the caster brake plate down gently to its end
stop with the front of your foot. To release the brake,
push the brake plate gently back up again with the
front of your foot until the caster is free.
1. Remove the safety spindle (locking pin) from the
bottom end of the pole by gently pressing the button
at the head of the spindle. The safety spindle can
now be removed easily.
2. Undo the transport lock (wing screw) gently and the
pole can now be raised.
Page 14
Albatros
2010-12