To check the speakerphone battery level:
•
Press the
The multicolored LEDs turn purple one by one to indicate battery charge
level. The more purple LEDs displayed, the higher the battery charge level.
When the battery is low, the speakerphone beeps rapidly and all multicolored
LEDs flash red rapidly every three minutes. See the "battery low warning" LED
pattern on page 9.
App
The VTech VCS601 app is available on the iTunes store and the Google Play
store. This app enables you to perform the following functions on the VCS601
speakerphone:
•
Set power save time
•
Enable/disable key tone
•
Upgrade firmware
For more information, refer to the app's online help -- tap
Factory reset
1. Press and hold the
The multicolored LEDs 1, 3, 5, 7 flash red quickly for three seconds and the
speakerphone plays a tone.
2. Press the
The multicolored LEDs turn off and the speakerphone plays three ascending
tones.
key.
key for five seconds.
key twice within three seconds.
19
and then tap Help.