VTech VCS601 Guide D'utilisation page 13

Power on/off
To turn the speakerphone on:
• Press and hold the
The speakerphone plays a power up melody.
The power LED indicator is illuminated when the speakerphone is on.
The power LED indicator flashes when the speakerphone is on and its
battery is charging.
To turn the speakerphone off:
• Press and hold the
The mulitcolored LEDs fully turn on in white, and then turn off one by one.
The speakerphone plays a power down melody.
The power LED indicator flashes slowly when the speakerphone is off and its
battery is charging.
Connecting to a Windows PC via USB
1. Plug the USB cable in the USB-C port on the speakerphone
2. Plug the other end of the USB cable in the USB-A port on your Windows PC.
When the speakerphone is recognized by your Windows PC, all the
multicolored LEDs turn green for two seconds. The speakerphone becomes
the external audio device of your Windows PC.
NOTE: The Bluetooth function will be disabled when the VCS601 connects to
a Windows PC via USB. During a Bluetooth call, the Bluetooth function won't
be disabled until the call is ended.
key for between two and five seconds.
key for more than five seconds.
13