Connecting to a Windows PC or mobile device
via Bluetooth pairing
1. When the speakerphone is idle, press and hold the
two seconds.
All the multicolored LEDs flash blue rapidly.
2. On your Windows PC or mobile device, open the Bluetooth menu.
If necessary, start Bluetooth or WLAN scanning/detection.
3. Select VCS601 from the list of available devices.
4. If you are asked for a PIN code, enter 0000.
If pairing is successful: The speakerphone plays three ascending
•
tones. All the multicolored LEDs turn blue for two seconds.
If pairing failed: The speakerphone plays three rapid tones. All the
•
multicolored LEDs briefly turn blue every three seconds. Try again or try
pairing with a different Bluetooth device.
Pairing your mobile device using NFC
NOTE: iPhone does not support Bluetooth pairing through NFC.
1. On your mobile device, turn NFC on.
2. Place the NFC zone of your mobile device against the NFC zone of the
speakerphone (indicated by
When NFC is detected, the speakerphone plays a tone. All the multicolored
LEDs turn white for one second.
3. If you are asked for a PIN code, enter 0000.
•
If NFC pairing does not work, try again or try connecting via Bluetooth
).
14
key for more than