Aqua-Base ESW Serie Manuel De L'utilisateur page 22

3.4 – ELECTRICAL BOX DUAL VOLTAGE (OPTION)
Extra electrical box dual voltage is use for functioning with 230VAC and 12/24VCC (according to the model).
Ref. Electrical box dual voltage:
Nominal power: 350W
Intensity max: 24VCC  825955: 12A
12VCC  825953: 25A
24VCC  825956: 30A
12VCC  825954: 60A
For installation, please refer to the technical documentation supplied with the dual voltage supply.
3.5 – SEMI-AUTOMATIC RINSING (EXTRA)
Ref. Semi-automatic rinsing: ESW30-60-90  904704 (12V) and 904705 (24V)
INSTALLATION
See the inboard installation in appendix (111121-08), to connect.
The semi automatic rinsing kit is installed between the on-board water system (fresh water under pressure), the 3-way inlet valve (1) and the
Low Pressure pump (3).
1. Connect the on-board water system to the activated carbon filter (pipe not included). This filter enables de-chlorination of the water
stored in the tank (with 0.4 mg/L maxi of chlorine before passing through the activated carbon filter) to protect the membrane
because its tolerance to active chlorine is very weak.
Connect the outlet of sea strainer (2) to the inlet semi automatic rinsing (pipe A2).
2.
3. Connect the outlet of the semi automatic rinsing to the booster pump (3) (pipe A3).
ELECTRICAL CONNECTION
The semi-automatic rinsing kit is connected to the electrical box with a quick connector.
ESW60-90 24V825956
ESW30 24V825955
U:\Affaires\Aqua-Base\ESW\09- Manuels Utilisateur\DOC UTILISATEUR ESW FRUKES 2023-06-Y3.doc
12V825954
12V825953
NB: The inlet fresh water on board must provide a minimum of
1.5 bar pressure and a maximum of 2.5 bar.
FR/UK/ES Page 22/52
VERSION 2023-06-Y3