Aqua-Base ESW Serie Manuel De L'utilisateur page 21

3.3 – REMOTE CONTROL PANEL (EXTRA)
REP. DESCRIPTION
50 Push button Start
51 Push button Stop
52 Push button Rinsing
53 Indicator lamp
54 Indicator lamp
55 Indicator lamp
These options allows control and surveillance of the AQUA-BASE unit from a remote location (chart table).
(Ref. Remote control: 999155)
Composition.
The remote control is composed of a built-in remote panel and its connecting wire.
Installation.
- Put the remote panel in place, according to the drawing below.
- Plug the connecting wire to the electric box: connector 8P.
- Open the electric box and remove the shunt between terminals 3 and 9 (otherwise it will cause a malfunction of the unit)
- Shut the main electric box.
WARNING: SHUNT BETWEEN TERMINALS 3-9 HAS TO BE REMOVED IF THE REMOTE CONTROL
PANEL IS CONNECTED
51
50
53
55
FUNCTION
Start the unit.
Stop the unit.
Rinse the unit.
Green led indicating the unit has started up.
Green led indicating the unit is in rinsing mode.
Green led indicating the unit is producing fresh water towards the storage tank.
52
U:\Affaires\Aqua-Base\ESW\09- Manuels Utilisateur\DOC UTILISATEUR ESW FRUKES 2023-06-Y3.doc
REMOTE CONTROL is an
OPTION
54
SHUNT 3-9 TO REMOVE
(inside the electric box)
FR/UK/ES Page 21/52
VERSION 2023-06-Y3