Aosom BMW i8 COUPE Manuel De L'utilisateur page 6

HINT: If your vehicle is Two Wheels Driving Type, see the next page please.
4
5
Remove all the parts from the rear axle.
1. Slide the rear gear box onto the rear axle from Left Side, keep the connector and the
motor on the gear box pass through the larger hole and out where the battery sits.
2. Slide the rear wheel onto the rear axle. Keep it match up with the gear box.
3. Slide a Ø12 washer onto the rear axle.
4. Tighten a lock nut to the end of the rear axle with a spanner.
5. Fit the hubcaps to the wheel.
6 Slide the Ø12 washer onto the rear axle (Right Side).
7. Slide the rear wheel onto the rear axle.
8. Slide the Ø12 washer onto the rear axle.
9. Tighten a lock nut to the end of the rear axle with a spanner. HINT: An extra
spanner has been provided to hold the Lock Nut on the other side of the rear
axle while tightening the Lock Nut on the other side.
10. Fit the hubcaps to the wheel.
1WD
Attach the Rear Wheels │ 5
3
6
2
7
Rear Bottom View
1
8
9
10