FINELY CHOPPING SMALL QUANTITIES
6 -
ACCESSORIES USED :
6.1 - ASSEMBLING THE ACCESSORIES
Follow the diagrams 10, 6.1 and 6.2.
6.2 - USAGE, TIPS AND DISMANTLING
• You can finely chop with the mini chopper :
- fresh herbs : 10g max. / 10secs max. / speed «4 or 7» (depending on model)
- dried fruits / Beef (boneless and trimmed meat) : 100g max. / 10secs max. / speed «1»
- vegetable puree : 150g max. / 20secs max. / «pulse» or speed «1»
• This grinder is not designed for hard products like coffee beans, hard spices nor liquids.
Dismantling the accessory :
in the reverse order of the assembly, diagrams 10, 6.2 and 6.1.
7 - ADJUSTING THE CORD LENGTH (see A7)
8 - ROUGH CHOPPING SMALL QUANTITIES
ACCESSORIES USED :
- Chop in a few seconds by pulsing: dried figs, dried apricots, etc. Quantity / max time : 100g / 5s
CLEANING
• Unplug the appliance.
• Do not immerse the motor unit (A) or the attachment (E) in water or under running water. Wipe
them with a dry or slightly damp cloth.
• Disassemble completely and rinse the accessories quickly after use.
Handle the blades with care to prevent injury. (diagram 10).
• Wash, rinse and dry the accessories: they are dishwasher-safe, except for all the metal components
in the mincer head: body (F), the kneader (C1) and the mixer (C2).
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
please refer to the chapter «before first use».
Your appliance still does not work? Contact an authorised service centre (see the list in the
service booklet).
AVAILABLE ACCESSORIES
See page 59 and visit the brand website.
Caution: this booklet contains instructions for additional accessories. Please keep safe for future
reference. Please contact the Customer Service for further information on how to purchase accessories.
Mini chopper lid (N1), Mini chopper bowl (N2)
Wait for the appliance to come to a complete stop and proceed
Assembled grinder.
(DEPENDING ON MODEL)
(DEPENDING ON MODEL)
8
EN