Samsung RF20A5101 Serie Mode D'emploi page 19

STEP 2 Flooring
If the refrigerator cannot pass through the entrance due to its size, see Door removal for
entrance.
Untitled-1 19
NOTE
To prevent floor damage, make sure the
front leveling legs are in the upright
position.
• The surface you install the refrigerator
on must support a fully loaded
refrigerator.
• To protect the floor, put a large piece
of cardboard along the path to the
refrigerator's final installation location.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to move the refrigerator, place
thick paper or cloth such as old carpets
along the path of movement.
English 19
2021-03-09 10:32:16