Télécharger Imprimer la page

Lifetime SPEED SHIFT 90492 Instructions D'assemblage

Système de basket-ball

Publicité

Liens rapides

SPEED SHIFT
BASKETBALL SYSTEM
MODEL 90492
BEFORE ASSEMBLY:
• Decide how you would like to fi ll your base
(sand is recommended).
• At least 2 people recommended for setup.
WATCH THE INSTRUCTIONAL HOW-TO VIDEO ON YOUTUBE
Scan the code, or visit go.lifetime.com/speedshift-fullav
YouTube
and the YouTube logo are trademarks of Google, LLC.
®
Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
TOOLS REQUIRED
1/2" (≈13 mm), 7/1" (≈11 mm),
9/16" (≈14 mm), 3/4" (≈19 mm)
(2)
(1)
(1)
QUESTIONS?
CONTACT LIFETIME CUSTOMER SERVICE:
Dial 1-800-225-3865
®
(1)
(1)
(1)
Live Chat:
www.lifetime.com/customerservice/home
(Click on the "LIVE CHAT" tab)
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
3/16" (≈5 mm)
(2, included)
(1)
(1)
330 lb (≈150 kg)
For Customer Service in Mainland Europe
and the United Kingdom,
E-mail: csinternational@lifetime.com
TABLE OF CONTENTS
Icon legend................................4
Warnings & notices.....................5
Pole assembly.............................6
Pole-to-base assembly...............10
Backboard-to-rim assembly.......17
Backboard-to-pole assembly......21
Parts identifi er..........................i–iv
Handle assembly.......................26
Final assembly..........................36
Moving the system....................41
Maintenance..........................42
Warning sticker.........................43
Registration........................44
Warranty................................45
Model Number: 90492
Product ID:

Publicité

loading

Sommaire des Matières pour Lifetime SPEED SHIFT 90492

  • Page 1 • Decide how you would like to fi ll your base (sand is recommended). • At least 2 people recommended for setup. WATCH THE INSTRUCTIONAL HOW-TO VIDEO ON YOUTUBE Scan the code, or visit go.lifetime.com/speedshift-fullav YouTube and the YouTube logo are trademarks of Google, LLC. ®...
  • Page 2 330 lb (≈150 kg) Enregistrement.....44 Garantie.......46 N° de modèle : 90492 ® QUESTIONS ? CONTACTER AUX SERVICES À LA CLIENTÈLE LIFETIME Référence du produit : Pour nos services à la clientèle du continent Composer le 1-800-225-3865 Entretien en direct: européen et au Royaume-Uni, www.lifetime.com/customerservice/home...
  • Page 3 330 lb (≈150 kg) Garantía........47 Número de modelo: 90492 ¿PREGUNTAS? ® PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME ID del producto: Marcar al 1-800-225-3865 Chat en vivo: Para nuestros servicios a clientes en el continente europeo y el Reino www.lifetime.com/customerservice/home...
  • Page 4 ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. • Indicates the parts required for a section. •...
  • Page 5 WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for safe operation of the system. To ensure safety, do not attempt to assemble this product without following the instructions carefully.
  • Page 6 POLE ASSEMBLY / ASSEMBLAGE DU POTEAU / ENSAMBLAJE DEL POSTE HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO CIH (x2) ADS (x2) ABB (x2) AAF (x2) ADA (x2) ABH (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal parts / Pièces en métal / Piezas de metal ALL (x1) ALH (x1) (Top / Supérieur / Ssuperior) Warning sticker...
  • Page 7 El tornillo girará libremente un vez insertado. • http://go.lifetime.com/speedshift-section1 • Align the hole in the bottom of the top pole (ALH) with the slot in the top of the middle pole (ALF).
  • Page 8  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ABH (x2) 9/16 in/po (≈14mm) (x2) CIH (x1) AAF (x2) ADA (x2) ABB (x2) ADS (x1) •...
  • Page 9  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Since the screws (ADS) from steps 1.2–1.3 only serve to orient the holes in the poles, the poles must still be fi...
  • Page 10 POLE-TO-BASE ASSEMBLY / ASSEMBLAGE DU POTEAU A LA BASE / ENSAMBLAJE DEL POSTE A LA BASE HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO DSA (x1) BTS (x1) ABN (x2) AAO (x2) ABD (x4) EEO (x2) AAE (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal parts / Pièces en métal / Piezas de metal AJC (x1) AJE (x1)
  • Page 11 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. • http://go.lifetime.com/speedshift-section2 • Attach the fl attened end of the pole brace (ALI) to the base (AJM) with the hardware shown. Only fi nger tighten the hardware for now.
  • Page 12  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ABD (x2) AAE (x1) AAO (x1) • Repeat the last step to install the other pole brace to the other side of the base. Note the angle of the braces. Only fi nger tighten the hardware for now.
  • Page 13  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ABN (x2) • Slide the large axle (AJC) through the wheels (AMU) and the holes at the end of the bottom pole (ALE) as shown. Slide the small axle (AJE) through the second set of holes near the end of the bottom pole.
  • Page 14  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Place the pole assembly on the ground with the pole bracket on the middle pole facing up. Position the large axle (AJC) under the bottom slots of the base (AJM) as shown, and step onto the base so the axle snaps into the slots.
  • Page 15  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5mm) (x2) BTS (x1) DSA (x1) • Rotate the pole assembly upward so that the small axle (AJE) snaps into the upper hollows of the base as shown.
  • Page 16  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 1/2 in/po (≈13mm) (x2) • Tip the system backward so the pole rests on the ground. While one adult holds the system in place, tighten the hardware indicated.
  • Page 17 BACKBOARD-TO-RIM ASSEMBLY / ASSEMBLAGE DU PANNEAU À L’ANNEAU / ENSAMBLAJE DEL TABLERO AL ARO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO AJW (x2) DFE (x4) AAM (x2) AAA (x4) AAV (x2) APZ (x1) AOW (x1) AAJ (x2) ABD (x2) ABK (x4) ABF (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...
  • Page 18 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. • http://go.lifetime.com/speedshift-section3 • Insert two bolts (AAM) with washers (ABD) and rubber washers (ABF) through the holes indicated in the back of the rim (ALX) as shown.
  • Page 19  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 1/2" (≈13mm) (x2) ABK (x2) APZ (x1) • Place the backboard face down onto a table, box or similar. Secure the rim (ALX) and plastic guard (ALD) to the backboard (AJI) with the hardware indicated.
  • Page 20  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16" (≈11mm) 1/2" (≈13mm) 9/16" (≈14mm) AJW (x2) AOW (x1) (x2) DFE (x4) AAV (x2) ABK (x2) AAA (x4) •...
  • Page 21 BACKBOARD-TO-POLE ASSEMBLY / ASSEMBLAGE DU PANNEAU AU POTEAU / ENSAMBLAJE DEL TABLERO AL POSTE HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO 7 5/8 in/po (≈19cm) ABL (x4) GBU (x2) ABN (x4) AAX (x4) 7 1/16 in/po (≈18cm) HMP (x2) AAD (x2) •...
  • Page 22 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. • http://go.lifetime.com/speedshift-section4 • Attach the short extension arms (AKC) to the backboard brackets in the direction indicated with the hardware indicated.
  • Page 23  SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7 5/8 in/po (≈19cm) 3/4 in/po (≈19mm) (x2) GBU (x1) AAX (x1) ABN (x2) HMP (x1) •...
  • Page 24  SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7 1/2 in/po (≈19cm) 9/16 in/po (≈14mm) (x2) DFC (x1) ABB (x1) • Secure the hex bolt (DFC) to the backboard brackets. Attach both counterbalance springs (AJY) by sliding the hex bolt (DFC) through the springs as indicated.
  • Page 25 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS This page intentionally left blank Cette page est intentionnellement laissée en blanc Esta página ha sido dejada en blanco intencionalmente...
  • Page 26 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS Metal parts / Pièces en métal / Piezas de metal ALH (x1) (Top / Supérieur / Ssuperior) ALL (x1) ALF (x1) (Middle / Intermédiaire / Intermedio Warning sticker Autocollant d’avertissement Etiqueta de advertencia ALX (x1) ALE (x1) (Bottom / Inférieur / Inferior)
  • Page 27 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS Plastic parts / Pièces en plastique / Piezas de plástico AJM (x1) AKZ (x1) AJI (x1) AJQ (x1) AKL (x1) AKN (x1) BAB (x1) BAA (x1) Right Left Arrow Droite Gauche Flèche Derecha...
  • Page 28 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS This page intentionally left blank Cette page est intentionnellement laissée en blanc Esta página ha sido dejada en blanco intencionalmente...
  • Page 29  SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7 1/16 in/po (≈18cm) 3/4 in/po (≈19mm) (x2) ABL (x4) AAD (x2) AAX (x2) CAUTION: HAVE ONE ADULT HOLD THE BACKBOARD IN PLACE UNTIL ASSEMBLY HAS BEEN COMPLETED! ATTENTION : UN ADULTE DOIT SOUTENIR LE PANNEAU EN PLACE JUSQU’AU MONTAGE SOIT COMPLÈTE ! PRECAUCIÓN : ¡UN ADULTO DEBE MANTENER EL TABLERO EN SU LUGAR HASTA QUE SE HAYA...
  • Page 30 HANDLE ASSEMBLY / ASSEMBLAGE DE LA POIGNÉE / ENSAMBLAJE DE LA MANIVELA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO 7 1/16 in/po (≈18cm) 7 1/16 in/po (≈18 cm) AAL (x1) AAD (x1) 7 in/po (≈18cm) 7 in/po (≈18cm) ADJ (x1) AAN (x1) AQG (x1) AAZ (x1)
  • Page 31 • En cas d’avoir des problèmes avec cette section, scanner le QR code en dessous pour voir un vidéo de l’assemblage. • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. • http://go.lifetime.com/speedshift-section5 • Remove the inner channel (AKQ) from the outer tube (ALB).
  • Page 32  SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS ADR (x2) AQG (x1) • Attach the lock tab (AQG) to the trigger (AMN) with the hardware indicated. •...
  • Page 33  SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS • Align the two screw bosses in the right handle (AKN) with the holes in the outer tube (ALB) as indicated.
  • Page 34  SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS AQH (x1) • Slide the trigger spring (AQH) onto the trigger in the location indicated. Compress the spring and insert the assembly in the right handle.
  • Page 35  SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS ADT (x7) • Attach the left handle (AKL) to the right handle with the hardware indicated. •...
  • Page 36  SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 7/16 in/po (≈11mm) (x2) AAL (x1) ADJ (x1) • Insert the hex bolt (AAL) through the holes indicated on the outer tube (ALB). Secure the hex bolt to the outer tube with the nut (ADJ).
  • Page 37  SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 7 1/16 in/po (≈18cm) 7 1/16 in/po (≈18 cm) 1/2 in/po (≈13mm) (x2) AAM (x1) AAN (x1) 7/16 in/po (≈11mm) (x2)
  • Page 38  SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 7 in/po (≈18cm) 7 in/po (≈18 cm) 9/16 in/po (≈14 mm) (x2) ABB (x1) AAZ (x1) 5.10 •...
  • Page 39  SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS Any large wrench N'importe quelle grande clé Cualquier llave grande 5.11 • Raise the backboard to the highest position. Using the closed end of a wrench, stretch the counterbalance springs (AJY) up and over the hex bolt (AAZ) as indicated.
  • Page 40 FINAL ASSEMBLY / ASSEMBLAGE FINAL / ENSAMBLAJE FINAL HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADP (x10) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique / Piezas de plástico AJQ (x1) AKP (x1) BAA (x1) BAB (x1) AEF (x2)
  • Page 41 • En caso de tener problemas con esta sección, escanear el código QR debajo para ver un video del ensamblaje. • http://go.lifetime.com/speedshift-section6 • Remove the plastic fi lm from the backboard (AJI). Attach the center frame pad (AJQ) and corner frame pads (BAA and BAB) to the backboard at the locations indicated.
  • Page 42  SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 310 lb (≈141 kg) 6.2A • Two adults are required to complete assembly. To prevent serious injuries, the pole should be held down by one adult at all times while the base is being filled.
  • Page 43  SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 6.2B • Two adults are required to complete assembly. To prevent serious injuries, the pole should be held down by one adult at all times while the base is being filled.
  • Page 44  SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Attach the net (AKZ). • Attacher le panier (AKZ). • Sujetar la red (AKZ). •...
  • Page 45 MOVING THE SYSTEM / DÉPLACER LE SYSTÈME / DEPLAZANDO EL SISTEMA WARNING: The system must only be moved by people capable of handling its weight. Children should not be allowed to move the system. 1. Adjust the system to its lowest position, and use caution to prevent the height mechanism from adjusting. 2.
  • Page 46 MAINTENANCE / ENTRETIEN / MANTENIMIENTO The life of your basketball system depends on many variables. The climate, exposure to corrosives such as salt, pesticides, or herbicides, and excessive use or misuse can all contribute to pole failure, which may cause property damage or personal injury.Check your basketball system frequently for loose hardware, excessive wear, and signs of corrosion.
  • Page 47 N’accrochez rien au manche, à l’anneau, elevación, ya que esto puede dañar el sistema y anular la garantía. au panneau ni aux leviers sous peine d’endommager l’équipement et d’annuler la garantie. Lifetime Products, Inc., Clearfield, UT 84016 www.lifetime.com # 1180194 1-800-225-3865...
  • Page 48 à des tiers, et ne leur permettra pas d’utiliser vos données personnelles à leurs propres fi ns. Nous vous invitons à lire notre politique de confi dentialité à www.lifetime.com (en anglais seulement) ENREGISTRER CE PRODUIT aujourd’hui! REGISTRAR EL PRODUCTO EN LÍNEA EN WWW.LIFETIME.COM...
  • Page 49 2. This warranty is nontransferable and is expressly limited to the repair or replacement of defective product. If the product is defective within the terms of this warranty, Lifetime Products, Inc. will repair or replace defective parts at no cost to the purchaser.
  • Page 50 6. Cette garantie remplace expressément toutes autres garanties, expresses ou tacites, y compris les garanties de commercialisation ou d’adaptation à un but particulier dans la mesure permise par les lois fédéraux et des états. Ni Lifetime Products, Inc. ni aucun de ses représentants n’assure aucune autre responsabilité concernant ce produit. Cette garantie vous accorde des droits particuliers, et vous aurai peut-être des autres droites qui varient d’un état à...
  • Page 51 NO ESTÁN DISPONIBLES O SON OBSOLETAS. 1. El comprador original recibe la garantía de que los sistemas de basquetbol Lifetime estarán libres de defectos de material o de mano de obra por un período de seis años a contar desde la fecha de la compra original. La palabra “defectos” se defi ne como imperfecciones que perjudican el uso del producto.
  • Page 52 ® www.lifetime.com Or dial 1-800-424-3865 ® AMÉLIORER L’ACHAT LIFETIME EN AJOUTANT DES ACCESSOIRES OU D’AUTRES PRODUITS Pour acheter des accessoires ou des autres produits Lifetime , visiter le : ® www.lifetime.com Ou composer le 1-800-424-3865 ® MEJORAR LA COMPRA DE LIFETIME...