Publicité
Les langues disponibles
Les langues disponibles
• When soldering, do not touch any part of the soldering iron except the handle, otherwise you may burn
yourself!
• Always solder on non-flammable surfaces. Ensure that there are no neighbouring materials that may be
damaged by the heat generated from the soldering iron.
• Always place the hot soldering iron in the holder when it is not in use.
• Improper use may cause a fire. Do not use the appliance in areas with flammable or explosive substances.
8. Product overview
9. Operation
• Unpack the soldering station and check that all parts are intact. Do not use parts that are damaged.
• Place the soldering station on a solid, heat-resistant surface.
• Place the stand for the soldering iron next to the soldering station. Note the position of the soldering station. If you
are right-handed, place the appliance to your right, or to your left if you are left-handed. Ensure that the stand is
placed on a fire and heat-resistant surface.
• Insert the plug on the soldering iron into the 4-pin connection socket (6) on the soldering station. The plug only fits
into the socket when the polarity is correct. Note the orientation of the tongue and groove on the socket and plug.
• Tighten the nut to secure the plug in place.
• Place the soldering iron into the stand. Note that the metal base plate on the stand will heat up over time.
1 LED screen
2 Temperature control button (-)
1
3 Temperature control button (+)
4 Temperature unit button °C/ °F
2
5 On/off button (I = ON / 0 = OFF) (hidden, located on
the rear of the appliance)
3
4
6 Connection socket
5
6
19
Publicité
