Samsung HT-H4500R Mode D'emploi page 20

Settings
DivX® Video
View DivX® VOD Registration
Codes to purchase and play
On Demand
DivX® VOD contents.
Language
You can select the language you prefer for the On-
Screen Menu, disc menu, etc.
• The selected language will only appear if it is
supported on the disc.
Security
The default PIN is 0000. Enter the default PIN to
access the security function if you haven't created your
own PIN.
Prevents playback of Blu-ray Discs
BD Parental
with a rating equal to or above a
Rating
specific age ratings unless the PIN
is entered.
Prevents playback of DVDs with a
DVD Parental
rating above a specific numerical
Rating
ratings unless the PIN is entered.
Change the 4-digit PIN used to
Change PIN
access security functions.
General
You can specify the time zone that
Time Zone
is applicable to your area.
Support
For more information about the
Software
Software Upgrade function, see
Upgrade
"Upgrading Software" on page 21.
Contact
Provides contact information for
Samsung
assistance with your product.
Terms of
View the general disclaimer
Service
regarding third party contents and
Agreement
services.
All settings will revert to the default
Reset
except for the network settings. The
default security password is 0000.
20
|
English
Networks and the Internet
When you connect this product to a network, you can
use network based applications and functions such as
BD-LIVE and upgrade the product's software through the
network connection.
Configuring Your Network Connection
Before you begin, contact your ISP to find out if your
IP address is static or dynamic. If it is dynamic, we
recommend you use the Automatic procedure below. If it
is static, you must use the Manual procedure that follows.
• Before you begin, confirm that the product is
connected to your router with a network cable.
Automatic
Ğ
To start the configuration process, follow these steps:
1.
In the Home menu, select Settings, and then press
the v button.
2.
Select Network, and then press the v button.
3.
Select Wired Network Settings, and then press the
v button.
The Wired Network Settings screen appears.
4.
+
Press the button on the Internet Protocol Setup
menu.
button to select Auto, and then press the
$%
Use
v button.
Settings
Wired Network Settings
Display
Internet Protocol Setup : Auto
Audio
IP Address
Network
Subnet Mask
System
Gateway
Language
Security
DNS
General
DNS Server
Support
> Move
5.
The Network function acquires and fills in the values
for IP Address, Subnet Mask, etc., automatically.
6.
After the Network function has acquired the network
values, press the RETURN ( ' ) button.
7.
Select Network Test, and then press v . The home
cinema validates the network connection. When it is
done, press the RETURN ( ' ) button.
\
: 0 0 0 0
: 0 0 0 0
: 0 0 0 0
: Auto
: 0 0 0 0
'
" Select
Return