Quick Start Guide - Panasonic DP-UB450 Mode D'emploi De Base

Quick Start Guide

STEP 1 : Connecting to a TV
AC adaptor
(supplied)
To a household mains socket
y To enjoy 4K output, you need to connect this unit to a 4K compatible TV.
y To enjoy images in 4K (50p/60p), you need an HDMI cable that supports 18 Gbps.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
It is recommended that you use Panasonic's HDMI cable.
y If you connect this unit to a 4K-compatible TV and perform "Easy Settings", 4K (50p/60p) will
be automatically selected.
y To view Ultra HD Blu-ray content in 4K/HDR format, connect to the HDMI terminal of a device that
supports HDCP2.2, 4K (50p/60p) 4:4:4, and HDR signals that meet Ultra HD Blu-ray standards.
y This unit consumes a small amount of AC power ( 8) even when turned off in standby mode. For
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
y The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
"live" as long as the AC adaptor is connected to an electrical outlet.
STEP 2 : Connecting to a network
„ LAN cable connection
Use category 5e or above straight LAN cables (STP) when connecting to peripheral devices.
6
(6) TQBS0315
Broadband router, etc.
LAN Cable
HDMI IN
HDMI Cable
(18 Gbps)
UB150
Internet