FUXTEC FX-RM5170agile Mode D'emploi Original page 44

ORIGINAL USER MANUAL FUXTEC FX-RM5170agile rev01
Cutting height adjustment
Use the cutting height adjustment lever to set the desired height to which the grass should be cut.
Caution: There is a considerable risk of injury. Therefore, please only carry out this operation when
the engine is switched off, and the cutting blade is stationary.
Front wheel adjustment:
1) Pull the lock up and turn it to "CLOSE" position, the direction of the front wheel can also be fixed
so that it only faces forward.
2) Pull up the lock and turn it to the "OPEN" position, the front wheel is swivel, allowing good
maneuverability when mowing around flowerbeds, trees, etc.
44