FUXTEC FX-RM5170agile Mode D'emploi Original page 34

ORIGINAL USER MANUAL FUXTEC FX-RM5170agile rev01
until the cutting blade has come to a standstill. Do not adjust the cutting height until the engine is
switched off and the cutting blade has stopped. Never open the discharge flap while the engine is
running. Before removing the grass collector, switch off the engine and wait until the cutting blade
has stopped. After emptying the grass collector, carefully reattach it and ensure it is securely
fastened to the lawnmower. If possible, do not mow wet grass. Do not use the garden tool in an
explosive environment with flammable liquids, gases or dust. When you stop work, never leave the
device unattended and keep it in a safe place.
After use
Switch off the device, and only then put the device in a safe place.
Do not store the device within reach of children. Make sure that the ventilation slots in the device
are clean.
Keep all nuts, bolts and screws tightened to ensure the mower is in safe working condition.
Check the grass collector frequently for wear or damage.
Only use a cutting blade designed for this lawnmower.
Please follow the installation instructions and remove the battery beforehand (only for an eS model).
Only have repairs carried out by a qualified technician or service centre.
34