Publicité
Les langues disponibles
Les langues disponibles
„ Check the operation of the lower guard spring. If
the guard and the spring are not operating properly,
they must be serviced before use. Lower guard may
operate sluggishly due to damaged parts, gummy
deposits, or a build-up of debris.
„ Lower guard may be retracted manually only for
special cuts such as "plunge cuts" and "compound
cuts". Raise lower guard by retracting handle and as
soon as blade enters the material, the lower guard
must be released. For all other sawing, the lower
guard should operate automatically.
„ Always observe that the lower guard is covering the
blade before placing saw down on bench or floor. An
unprotected, coasting blade will cause the saw to walk
backwards, cutting whatever is in its path. Be aware
of the time it takes for the blade to stop after switch
is released.
„ lower guard into the open position. If saw is accidentally
dropped, lower guard may be bent. Raise the lower
guard only with the Lower Guard Lift Lever and make
sure it moves freely and does not touch the blade or
any other part, in all angles and depths of cut.
„ This product is intended to cut wood and wood-like
products only.
„ Avoid using solvents when cleaning plastic parts and
the guard. Most plastics are susceptible to damage
from various types of commercial solvents and may
be damaged by their use . Use clean clean cloths to
remove dirt, dust, oil, grease,etc.
LASER SAFETY
„ Do not stare into beam during operation.
„ Do not project the laser beam directly into the eyes of
others. Serious eye injury could be caused.
„ Do not place the laser in a position that may cause
anyone to stare into the laser beam intentionally or
unintentionally.
„ Do not use optical tools to view the laser beam.
„ Do not operate the laser around children or allow
children to operate the laser.
„ Do not attempt to repair the laser device by yourself.
„ Do not attempt to change any parts of the laser device
by yourself.
„ Any repairs must only be carried out by the laser
manufacturer or authorized service agent.
„ Do not replace the laser with a different type.
INTENDED USE
You may use this product for cutting all types of wood
English (original instructions)
10
MAINTENANCE
„ When servicing, use only identical Greenworks Tools
replacement parts. Use of any other parts may create
a hazard or cause product damage.
„ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
„ Do not attempt to modify this tool or create accessories
not recommended for use with this tool.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SAFETY INSTRUCTIONS FOR BATTERY PACK
„ Do not dismantle, open or shred secondary battery
pack.
„ Do not expose battery pack to heat or fire. Avoid
storage in direct sunlight.
„ Do not short-circuit battery pack. Do not store battery
pack haphazardly in a box or drawer where they may
short-circuit each other or be short-circuited by other
metal objects.
„ Do not remove battery from its original battery pack
enclosure required for use.
„ Do not subject battery pack to mechanical shock.
„ In the event of leaking, do not allow the liquid to come
in contact with the skin or eyes. If contact has been
made, wash the affected area with copious amounts
of water and seek medical advice.
„ Do not use any charger other than that specifically
provided for use with the equipment.
„ Observe the plus (+) and minus (–) marks, battery and
equipment and ensure correct use.
„ Do not use any battery pack which is not designed for
use with the equipment.
„ Do not mix battery pack with different manufacture,
capacity, size or type within a device.
„ Keep battery pack out of the reach of children.
„ Seek medical advice immediately if battery pack has
been swallowed.
„ Always purchase the correct cell or battery for the
equipment.
„ Keep battery pack clean and dry.
Publicité
