Albrecht Audio DR 56 C Mode D'emploi page 26

3. Before first use:
1. Attach the DR56C car radio adapter to the windscreen
using the suction mount included in the product contents.
2. Connect one end of the USB power cable to the Micro
USB port on the right side of the DR56C and the other end
to the USB power adapter. Plug the USB power supply
into the cigarette lighter of your car.
3. Install the antenna as described in chapter 3.1.
4. Connect the supplied antenna to the antenna input on the
right side of the DR56C.
5. Switch on the device by pressing the On/Standby button
on top of the device, and the Albrecht logo appears in
the display. When used for the first time, the device
automatically searches for available DAB/DAB+ stations
and stores them in the device's station memory until
another DAB station scan is performed. During the DAB
Autoscan, a bar indicates the progress of the scan.
6. If the Full Scan is not started automatically, long press the
SCAN button or select Full Scan from the main menu.
7. As soon as the station scan is completed, you can select
any of the stored DAB/DAB+ radio stations by turning the
◄► knob.
26