Network Setting - ViewSonic VSD 242 Guide Rapide De Début

H. Network Setting
Connecting to Wireless LAN
1) Tap "All applications" – "Settings".
2) Turn "Wi-Fi" to ON by dragging "OFF" to the right.
3) When Wi-Fi is turned on, a list of all available wireless LAN access points will be shown on the right
side of the screen. Tap the desired Wireless LAN access point for connection.
4) If a password is required, enter it and tap "Connect" to connect to the wireless LAN.
Connecting to RJ45
Simply plug in your Ethernet cable to the RJ45 port to connect to a LAN. No set-up or configuration is
required.
I. Formatting
Resetting Your Smart Display
Formatting will delete all of your data created and added after purchase (including system and application
settings, downloaded applications, etc.)
1) Tap "All applications" – "Settings".
2) Tap "Back up & reset".
3) Tap "Factory data reset".
4) Confirm all onscreen instructions and tap "reset".
5) Again, confirm all onscreen instructions and tap "Delete All". Formatting will begin shortly.
System will reboot several times during formatting.
J. Use as HDMI-supported Display
Depending on the mode selected, this product may be used as an HDMI-supported display.
TM
Android Mode
Can be used as an Android device.
HDMI Mode Connected to the PC can be used as a Monitor device.
Switching to HDMI Mode
1) Connect the main unit and HDMI device with the HDMI-HDMI cable. Optional accessory; may not
be included with this product package in some territories.
2) Tap the SELECT icon
Switching to Android Mode
1) Tap the SELECT icon
to switch to HDMI mode.
to switch to Android mode.
12