Turn On The Power - ViewSonic VSD 242 Guide Rapide De Début

E. Start-up and initial setting

Turn on the Power

1) Make sure the power cable and AC adapter are connected.
2) Long press the power switch until the status LED turns blue.
1) Select your language and tap
"Start".
4) Confirm on screen
instructions and tap " ".
7) Confirm onscreen instructions
and tap " ".
10) The initial settings are
completed.
2) Select a Wi-Fi network, or tap
"Skip" to configure later.
5) Select the appropriate time
zone to set the date and time,
and then tap " ".
8) Tap "Next" to setup your
"Google Now™" or "skip" to
configure later.
10
3) Tap "Yes" to setup your
Google account or "No" to
TM
configure later.
6) Enter username and tap " ".
9) Confirm onscreen
instructions and tap "OK".