Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Delay Start Option
3
This option allows you to delay the start of a wash cycle for up to 24 hours.
With the door open, turn the dishwasher ON by pressing the ON/OFF button; then press the DELAY button to choose
the number of hours you want to delay the start of the wash cycle. The hours will show in the display window.
NOTE: To cancel the DELAY HOURS option before the start of the cycle, repeatedly press the DELAY HOURS button
until the display is blank or reads "00."
2 Digit Display
4
This display is used for DELAY START and cycle time countdown.
When a cycle is selected, this display is populated with the total number of minutes in the cycle (up to 99 minutes).
For cycle times above 99 minutes the display will read "99".
5
Starting a Cycle
After selecting the wash cycle (Step 2) and DELAY START (Step 3), if desired, close the door of the
dishwasher to start the cycle or begin the DELAY START countdown. When the door is closed, there will be a 5
second delay followed by a 60 second pump out before the water fill begins.
Status Indicators
6
SANITIZED If the SANITIZE cycle is selected, the sanitized indicator light will be turned on at the end
of the cycle. If the NSF requirements for sanitization are not reached, the light will not
turn on.
CLEAN The green light will display and a beep will sound to alert you that the wash cycle is complete.
If the door is NOT opened, the beep will sound 4 times.
GEAppliances.com
7
Publicité
