Publicité
Les langues disponibles
Les langues disponibles
Network cameras list
Before using a Network camera, you need to register the camera as shown below. You can also set
Default camera or Disconnect/Delete the registered cameras.
Press "Network cameras list" and
display screen
Set Network camera setting
Network cameras list
Camera name
Model
Status
Camera 1
BL-C210A
Connected
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Select
OK
RETURN
Find cameras
Delete
Disconnect
Default camera
For this operation, please refer to the operating
manual for the Network camera.
Software update
Select "Software update"
Menu
Network settings
Connection test
Wireless (WiFi)
Network connection
Wireless network
IP address/DNS settings
Network cameras list
Software update
00-0b-97-7c-65-e9
Mac address
42
tc̲L32̲x30̲eng̲0592.indb 42
tc̲L32̲x30̲eng̲0592.indb 42
All manuals and user guides at all-guides.com
select
Default
select
OK
Start camera search.
Before you start to search for a camera, switch the
camera to registration mode.
Search condition also depends on "Network settings"
Delete camera information.
Disconnect to camera.
"Disconnected" will be displayed in "Status".
Set to default use.
Displayed "(Default)" next to camera name.
(Available only when reconnecting)
Connect to Camera. "Connect" will be displayed in
"Status".
Press OK to start the Software update screen
Follow directions on the screen
Set "Clock" first. (p. 15)
2011/01/05 11:22:38
2011/01/05 11:22:38
Publicité
