Aiwa NSX-A115 Mode D'emploi page 4

Check
your system and accessories
CX-NAI 15 Compact disc stereo cassette receiver
SX-NA115 Front speakers
Remote control
AM antenna FM antenna
Operating Instructions, etc
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local
voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.
There are no differences between the front speakers. Both
speakers can be connected as L (left) or R (right).
7 Connect the right and left speakers to the main
unit.
Connect the right speaker cord to SPEAKERS R terminals,
and left to SPEAKERS L terminals.
The speaker cord with the white stripe should be connected
to ~ terminal and the black cord to 0 terminal.
2 Connect the supplied antennas.
Connect the FM antenna to FM 75 Q terminals and the AM
antenna to AM LOOP terminals.
AM antenna
3 Connect the AC cord to an AC outlet.
4
ENGLISH