Publicité
Les langues disponibles
Les langues disponibles
8;9'
5
4,5
'3,7,
8,9
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape.
1
2
3
4
5
Insert the tape into deck 1.
Insert the tape with the side to be recorded on first facing out
from the unit. Wind up the tape with +.
Press CD and load the disc(s).
Press CDI EDIT/CHECK
twice while pressing
SHIFT on the remote control.
"EDIT" and "PRGM" are displayed.
When "Al" is displayed,
press CD EDIT/CHECK
while
pressing SHIFT again.
Press
numbered
buttons
on the remote
control
to designate
the tape length.
10
to 99 minutes can be specified.
The <
and -
are also available to designate the tape
length.
Tape side A (front side)
Tape length
Maximum recording
time for side A
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press numbered buttons O-9 and + 10 on
the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2, then press +10 and O.
Selected track number
Remaining time on side A
Program number
Programmed tracks
6
7
8
9
Repeat step 5 for the rest of the tracks for side
,x
A.
~~k.
!
A track whose playing time is longer than the remaining time
$ "'~~
cannot be programmed.
;;@~
J
Press CD EDIT/CHECK while pressing
SHIFT
on
'~ ~'
the remote control to select side B and program
'
the tracks for side B.
After confirming "Bon
the display, repeat step 5.
Tape side B (reverse side)
Press CD EDIT/CHECK while pressing SHIFT on
the remote control to select side A and press
to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the end of tape is reached, deck 1 enters
the recording stop mode. After entering the recording stop
mode, go to step 9.
Press CD EDIT/CHECK while pressing SHIFT on
the remote control for recording of the second
side.
"B
is displayed.
10 Turn over the tape in deck 1 and press O to start
recording.
Recording starts.
To stop recording
Press
/A
on deck
1. Recording
and CD play stop
simultaneously.
m
To check the order of the programmed
track numbers
Before recording, press CD EDIT/CHECK while pressing SHIFT
on the remote control to select side A or B, and press +
or
-
repeatedly.
Tape side
F>rogramnumber
Track number
Programmed
track numbers
To
change the program of each side
Press CD EDIT/CHECK while pressing SHIFT on the remote
control to select side A or B, and press
CLEAR to clear the
program on the selected side. Then program tracks again.
To clear the edit program
Press
CLEAR twice so that "EDIT disappears on the display.
m
Up to 30 tracks can be programmed from any of the inserted
discs.
"FULL' is displayed if you attempt to program more than 30
tracks.
ENGLISH
13
Publicité
