tacwise 53-13EL Manuel De L'opérateur page 8

Battery Tool Use and Care
• Only use the battery charger specified by the manufacturer. Use of
the wrong battery pack with the charger may create the risk of a fire.
• Keep away from other metal objects such as keys, coins, nails,
screws, paper clips etc., when battery pack is not in use. Small metal
objects like those listed above could make a connection across the
terminals, shorting the battery terminals together and may cause
a fire.
• Never leave a battery pack unattended whilst charging.
• Liquid may leak from the battery under abusive conditions. Avoid
contact. If skin should accidentally come into contact with liquid, flush
with water. If liquid should come into contact with eyes seek additional
medical help. Liquid ejected from a damaged battery may cause
irritation or burns.
Specific Safety Instructions
• Always assume that the tool is loaded with fasteners. Handling the
tool without care could result in an unexpected firing of fasteners and
lead to personal injury.
• Use only the staples/nails specified in the manual. Use of
accessories that are not designed for this tool could result in personal
injury and/or damage to the power tool.
• Do not touch any parts of the power tool magazine or nose during
operation. Hold only by the handle or housing of the tool.
• Do not activate the power tool unless it is in contact with the work
piece. Serious injury can result if you depress the safety contact nose
with your fingers, or by improper operation.
• Fastening thin items. Special caution must be taken for possible
penetration through thin items, as this could cause possible harm
to anyone or anything behind the work piece or immediate area.
• Never use the tool as a hammer. The sudden impact could shift
inner components of the power tool, resulting in a fastener discharge
and injury.
• When fastening has been completed always disconnect from the
power source (battery) prior to unloading the magazine.
• Do not disassemble any of the fastener driving parts.
• Prior to each operation, check that the safety and triggering
mechanism is functioning properly.
• Never point any power tool at yourself or at any other person.
While working, hold the tool in such a way that no injuries can be
caused to the head or to the body in the event of possible recoil.
• Never actuate the power tool into free space or the air.
8
2V 53-13_Staple-Nail Gun_Manual_MultiLang.indd 8 2V 53-13_Staple-Nail Gun_Manual_MultiLang.indd 8 02/12/2020 12:09 02/12/2020 12:09