Mitsubishi Electric MSZ-GS18NA Notice D'utilisation page 57

E
CONO COOL OPERATION
Swing air fl ow (change of air fl ow) makes you feel cooler than constant air fl ow.
The set temperature and the airfl ow direction are automatically changed by the
microprocessor. It is possible to perform cooling operation with keeping comfort.
As a result energy can be saved.
1
Press during COOL mode
ECONO COOL operation.
The unit performs swing operation vertically in various cycles according
to the temperature airflow.
Press again to cancel ECONO COOL operation.
• ECONO COOL operation also is cancelled when the VANE or POW-
ERFUL button is pressed.
P
OWERFUL OPERATION
1
Press during COOL or HEAT mode
to start POWERFUL operation.
Fan speed : Exclusive speed for POWERFUL mode
Horizontal vane : The vane follows as your selection during Manual/
Swing.
Downward position during AUTO operation.
• Temperature cannot be set during POWERFUL operation.
Press again to cancel POWERFUL operation.
• POWERFUL operation also is cancelled automatically in 15 minutes,
or when the OFF/ON, FAN, or ECONO COOL button is pressed.
A simplifi ed set back function enables to recall the preferred (preset) setting with
a single push of the
the previous setting in an instance.
Pages 5, 6 to start
Note:
Example of use:
1. Low energy mode
Pages 5, 6
2. Saving frequently used settings
S
MART SET OPERATION
button. Press the button again and you can go back to
1
Press during COOL, or HEAT mode to select
SMART SET mode.
2
Set the temperature, fan speed, and airfl ow direction.
• The same setting is selected from the next time by simply pressing
• Two settings can be saved. (One for COOL, one for HEAT)
• Select the appropriate temperature, fan speed, and airflow direction
according to your room.
Press again to cancel SMART SET operation.
• SMART SET operation also is cancelled when the MODE button is
pressed.
Set the temperature 4°F (2°C) to 6°F (3°C) warmer in COOL and cooler in
HEAT mode. This setting is suitable for unoccupied room, and while you are
sleeping.
Save your preferred setting for COOL and HEAT. This enables you to select
your preferred setting with a single push of the button.
.
En-8