Mitsubishi Electric MSZ-GS18NA Notice D'utilisation page 56

● OPERATING INSTRUCTIONS ●
F
AN SPEED AND AIRFLOW DIRECTION ADJUSTMENT
Fan speed
1
Press to select fan speed. Each press changes
fan speed in the following order:
(AUTO) (Low) (Med.)
• Two short beeps are heard from the indoor unit when set to AUTO.
• Use higher fan speed to cool/heat the room quicker. It is recommend-
ed to lower the fan speed once the room is cool/warm.
• Use lower fan speed for quiet operation.
Note:
Multi system operation
When several indoor units are operated simultaneously for heating operation,
the temperature of the airfl ow may be low. In this case, it is recommended to set
the fan speed to AUTO.
Up-down Airflow direction
1
Press to select airfl ow direction. Each press
changes airfl ow direction in the following order:
(AUTO) (1) (2)
(AUTO) .........The vane is set to the most effi cient airfl ow direction. COOL/
DRY/FAN: horizontal position. HEAT: position (4).
(Manual) .......For efficient air conditioning, select the upward position for
COOL/DRY, and the downward position for HEAT/FAN. If
the position (4) or (5) is selected during COOL/DRY, the vane
automatically moves to the upward position after 0.5 to 1 hour
to prevent any condensation from dripping.
(Swing) .........The vane moves up and down intermittently.
• Two short beeps are heard from the indoor unit when set to AUTO.
En-7
(High) (Super High)
(3) (4) (5) (SWING)
Left-right Airflow direction
1
Press to select horizontal airfl ow direction. Each
press changes airfl ow direction in the following order:
(SWING)