Publicité
Les langues disponibles
Les langues disponibles
USE & TIPS
"COLD AREA" indicator
The sign opposite can be found in your freezer.
It clearly shows the coldest zone of your appliance, where the temperature is lower than
or equal to +4°C.
A temperature gauge in this zone allows you to check the settings of your freezer.
Adjust the thermostat
Temperature correct
OK
Warning!
If the door of the freezer is left open for too long, the temperature inside the freezer will rise. Check
the temperature gauge within 30 seconds after opening the door to make sure that the reading is
correct.
Temperature setting
Control Panel
Buttons
3 – Press 3 to select Eco mode
5 – Press 5 to adjust the temperature of the freezer: -16, -18, -20, -22, -24°C, and to activate
the Super freeze mode
Lights
1 – Show the temperature of the freezer
2 – Super freeze mode light
4 – Alarm light: appears when there is an error on one of the components such as defrost
heater, compressor or when the sensor is no longer connected
6 – Eco mode light
Setting
• Press Mode button (#3 on control panel drawing) to select the mode wanted.
• Press Freezer button (#5 on control panel drawing) to adjust the setting temperature. The
temperature of the freezer is automatically set at -18°C.
Publicité
