Publicité
Toyota Avensis 4D
2009 - ....
Ref. 1760T30
Fitting instructions
1.
Disassemble the plastic protection plate at the bottom of the bumper. Permanently remove the
towing ring.
2.
Install the assembly plate (1) at the left and (2) at the right against the bottom of the chassis beam
with (A) on the screw-thread holes, insert the bolts without tightening.
3.
Install the tow bar with (B) between both the assembly plates, insert he bolts and do tighten
everything firmly (see tension).
4.
Assemble the ball together with the socket plate holder.
5.
Make an incision in the plastic protection plate according to picture 1 and reassemble it on the
vehicle.
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
Publicité
