Esoteric C-03Xs Mode D'emploi page 6

Contents
Thank you for purchasing this Esoteric product.
Read this manual carefully to get the best performance from this
product. After reading it, keep it in a safe place with the warranty card
for future reference.
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Precautions for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Names and functions of parts (main unit) . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Names and functions of parts (remote control) . . . . . . . . . . . . . . . . . . . . 12
Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Balance and input level settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Additional settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Specifications and dimensional drawings . . . . . . . . . . . . . . . . . . . . . . . . . 22
6
Before use
What's in the box
Check to be sure the box includes all the supplied accessories shown
below. Please contact the store where you purchased this product if
any of these accessories are missing or have been damaged during
transportation.
Power cord × 1
Remote control × 1
C-02X: RC-1315
C-03Xs: RC-1301
Batteries for remote control (AAA) × 2
Felt pads* × 4
Owner's manual (this document) × 1
Warranty card × 1
* Apply the included felt pads to the bottoms of the foot-stands
(C-02X) or feet (C-03Xs) to avoid scratching the surface where the
unit is placed.
Note about pinpoint feet (C-02X only)
High-precision metal pinpoint feet are attached firmly to the bottom
plate of the C-02X.
The stands for these feet are loose, but when the unit is placed in
position, it is supported by these pinpoint feet, which will effectively
disperse vibrations.
Chassis
Foot-stand (metal)
o This unit is very heavy, so take care to avoid injury during installation.
o Apply the included felt pads to the bottoms of the foot-stands to
avoid scratching the surface where the unit is placed.
Pinpoint foot (metal)
Screws that attach
foot-stand