Esoteric C-03Xs Mode D'emploi page 17

Additional settings
You can also make the following settings and restore factory defaults.
Volume curve
Output
Through (RCA2)
Illumination
Input source name
Automatic display (FL) off
Automatic power saving function
1
Press and hold the SETUP button for at least 2 seconds.
"VolMode>***" appears on the display and the unit enters set-
ting mode.
2
Press the SETUP button repeatedly to select the set-
ting item you want to change.
Each time you press the SETUP button, the display changes.
o To exit setting mode and return to the ordinary display, do
nothing for at least 10 seconds.
Press for at least
2 seconds
3
Press the INPUT (k/j) buttons to change the setting.
4
Press the SETUP button repeatedly until the display
resumes showing its usual contents. Setting mode
ends when the usual contents are shown.
Setting mode will also end and the ordinary display will reappear
if nothing is done for 10 or more seconds.
o These settings will be retained even if the power cord is
disconnected.
17