Esoteric C-03Xs Mode D'emploi page 15

Balance and input level settings
You can set the left and right balance, output level adjustment and
phase inversion. You can set these independently for each pair of
input connectors.
1
Turn the INPUT knob to select the input source you
want to set.
2
Press the SETUP button repeatedly to select the set-
ting item you want to change.
Each time you press the SETUP button, the display changes.
o While making these settings, the SETUP indicator appears at
the top left of the display.
o To exit setting mode and return to the ordinary display, do
nothing for at least 10 seconds.
3
Press the INPUT (k/j) buttons to change the setting.
4
Press the SETUP button repeatedly until the display
resumes showing its usual contents. Setting mode
ends when the usual contents are shown.
Setting mode will also end and the ordinary display will reappear
if nothing is done for 10 or more seconds.
o These settings will be retained even if the power cord is
disconnected.
15