Publicité
Les langues disponibles
Les langues disponibles
INSERTING TAPES
Use Type I (normal), Type
II
(high/CrOz) or Type
IV
(metal) tapes
for playback.
-REV MODE
- ~ PUSH
EJECT
-DECK2
Press TAPE, then press A PUSH EJECT to open the
cassette holder.
A
--
Insert a tape with the exposed side down. Push the cassette
holder to close.
To select a reverse mode on Deck 2
Each time REV MODE is pressed, the reverse mode changes.
To ~lav one side only, select Z.
To rdav from front sid e to back side once only, select Z).
To dav both sides re~e-,
select C=).
When tapes are loaded in both decks, =) on the display
indicates Continuous Play.
On Deck 1, tapes are always played back on both sides once.
Insert a tape.
Press
+*
to start
play.
Playing
Playback
deck number
side indicator
The tape counter indicates the
tape running length.
P: The front side is being played (forward).
+: The back side is being played (reverse).
When tapes are loaded in both decks
Press TAPE/DECK 1/2 first to select a deck.
The selected deck number is displayed.
To stop play, press
.
a
Y
To pause play (Deck 2 only), press 11. To resume play, press
again.
To change the playback side, press+ FDIRECTION/PRESET
in play or pause mode.
To fast forward or rewind, press 4
or -.
Then press W to
stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE. The power is turned on and play of the inserted
tape begins.
To set the tape counter to "0000"
Press
CLEAR in stop mode.
The counter is also set to "0000" when the cassette holder is
opened.
ENGLISH 13
Publicité
