Aiwa Z-L70 Mode D'emploi page 10

MI-M4
\ F====%%
LATIN,
CLASSIC
I
GEQ
!',-%",',., ,,
P," ',
~.,m,wd'~%'la.. 9-.
,$,! ,:
r,,,
"-, -.,
.fv., i
,-w,r., ,r,w
!* ., ,
-' :
',,.'
,.. ., - '-
SELECTING THE PROGRAMMED
EQUALIZATION CURVE
This unit provides the following 4 different equalization curves:
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
LATIN: Accented higher frequencies for Iatin-type music
CLASSIC: Enriched sound with heavy bass and fine treble
Press one of the graphic equalizer preset buttons.
The PRGM indicator turns on.
The selected program mode indicator flashes and that program
mode appears for 4 seconds on the display.
To cancel the selected mode
Press the selected graphic equalizer preset button. "GEQ OFF"
is displayed and the equalization curve becomes fiat.
To select with the remote control
Press GEQ repeatedly until the desired program mode is
displayed.
r
ROCK— POP — LATIN — CLASSIC —
'------------ PRGM mode -----------J
GEQ OFF+GEQ M4+-GEQ M3+-GEQ M2+GEQ MI*
(cancel) ~
---------MANUAL mode -------
MANUALLY
The equalization curve can be customized to suit your preference.
1 Press GEQ FREQ
(LOW).
The lowest level frequency indicator flashes for 8 seconds.
2 Within 8 seconds, turn MULTI JOG to adjust the
level of the lowest frequency.
3 Press GEQ FREQ (HIGH).
The highest level frequency indicator flashes for 8 seconds.
4 Within 8 seconds, turn MULTI JOG to adjust the
level of the highest frequency.
The frequency level indicators between the lowest and the
highest are adjusted accordingly.
"w.. , .,,
. ...,..", . ..
MEMORIZING" 'THE--NEW 'EQUALIZATION
CURVES
Up to 4 customized equalization curves can be stored on the J
MANUAL mode Ml -M4.
1
2
3
Set a new equalization curve with GEQ FREQ and
MULTI JOG.
See "SETTING A NEW EQUALIZATION CURVE
MANUALLY.
The created equalization curve is displayed for 8 seconds.
Within 8 seconds, press ENTER.
"MEMORY" is displayed and all the manual mode indicators
flash for 8 seconds. Go to step 3 within those 8 seconds.
If this step is not completed within 8 seconds, press GEQ
FREQ first to display "GEQ ON". Then press ENTER within
8 seconds.
Press one of the graphic equalizer preset buttons
MI-M4.
The MANUAL indicator turns on and the equalization curve
is stored.
To select the stored equalization curve
Press one of the graphic equalizer preset buttons M1–M4.
1()
ENGLISH