Hitachi RAS-E10HB Mode D'emploi page 10

ECO OPERATION
Energy saving operation by changing set temperature and by limiting the maximum power consumption value.
L.H
NOTE
In case the power consumption is already low,ECO operation will not reduce the
power consumption.
By pressing (POWERFUL) button, ECO operation is cancelled.
After auto restart, ECO operation is cancelled and previous operation mode shall start.
By pressing the (ECO) button during Auto, Heating,
Dehumidifying or Cooling operation, the air conditioner
performs the "ECO" operation.
Press (ECO) button during operation.
is displayed on the LCD.
START
Energy saving operation will start by changing
the set temperature higher or lower and
saving operation power consumption.
Press (START/STOP) button.
CANCEL
Press (ECO) button again
" " disappears from the LCD.
– 6 –