Charging Station; Outside Station - REV 003007108 Mode D'emploi

Table des Matières

Publicité

Operating manual
PLEASE READ CAREFULLY TO AVOID INSTALLATION ERRORS.
1. Equipment description (Figure: see on last page)
INDOOR STATION
HANDSET
1) Loudspeaker
2) Battery check LED
3) Talk button
a. To talk to the visitor, push the talk button once after the bell rings.
b. End the conversation by pressing the talk button again.
4) Door opener button
a. Push the door opener button for at least 1 second during the conversation to activate the door
opener (not possible in standby mode).
5) Battery check LED for the outside station

CHARGING STATION

6) Socket for the AC adapter.

OUTSIDE STATION

Outside communication unit position
7)
Loudspeaker
8)
Bell button and nameplate
9)
Control LED
10) Screw hole for installation
11) Microphone
Powerbox
12) Battery check LED
13) Mounting holes
14) Cable exit for door opener and bell transformer
15) Reset button
16) Lithium Polymerrechargeable battery
2. Functions and technical details
2.4 GHz Digital radio technology
Very high sound fidelity
Coding interchangeable (no interference with similar equipment)
Security by AFH function (Adaptive Frequency Hopping)
Door opening function
Rechargeable Lithium Polymer batteries
Battery monitoring
Low power consumption
SPECIFICATIONS INSIDE AND OUTSIDE STATIONS
Transmitting frequency: 2.400~2.479 GHz
Transmitter power: 20 dBm
Modulation type: GFSK
Frequency selection method: AFH (Adaptive Frequency Hopping)
Receiver sensitivity: -100 dBm
7
GB
GB

Publicité

Table des Matières
loading

Table des Matières