Publicité
Les langues disponibles
Les langues disponibles
Operating the oven
Sound on/off
By using this feature, you can set the oven controls to operate silently.
How to turn the sound on or off
1.
Press Broil and 6 at the same time for 3 seconds.
The display will show Snd On (sound on) or Snd OFF (sound off).
2.
The default setting is Snd On.
Press 0 to select Snd OFF or Snd On.
Pressing 0 changes the mode between Snd On and Snd OFF.
3.
Press START/SET.
Demo mode
This option is for use by retail establishments for display purposes only. (The
heating element does not operate.)
How to enable or disable the demo mode
1.
Press Broil and 7.
2.
Pressing 0 changes the mode between On and OFF.
3.
Press START/SET.
Control lockout
This feature lets you lock the buttons on the touch pad so they cannot be activated
accidentally.
How to activate the control lockout feature
•
Press OFF/CLEAR for 3 seconds.
Loc and the lock icon appear in the display as well as the current time.
All functions must be cancelled before the control lockout is activated.
This function is available when the oven temperature is under 400 °F.
How to unlock the controls
•
Press OFF/CLEAR for 3 seconds.
Loc and the lock icon will disappear from the display.
38 English
NE59K6851SS_AC_DG68-00872A-02_EN+MES+CFR.indb 38
Maintaining your appliance
Steam-cleaning
How to set the oven for steam-cleaning
For light cleaning, the Steam-cleaning function saves time and energy.
1.
2.
3.
4.
5.
6.
NOTE
When steam-cleaning, use exactly 10 oz. of water since this produces the best
results.
NOTE
If you press Steam Clean when the oven temperature is above 100˚F, Hot will
appear in the display. Because these functions produce the best results when
started while the oven is cool, we recommend that you wait until the oven has
cooled down and Hot disappears from the display.
Remove all accessories from the oven.
Pour approximately 10 oz. (300 ml) of
water onto the bottom of the empty
oven and close the oven door.
Use normal water only, not distilled
water.
Press Steam Clean.
Press START/SET.
When the operation is complete, the
display will blink and a beep will sound.
Press OFF/CLEAR.
Clean the oven's interior.
There will be a significant amount of
water remaining on the bottom of the
oven after a steam-cleaning cycle.
Remove the residual water with a
sponge or soft dry cloth.
2018-08-29
12:48:27
Publicité
