Publicité
Les langues disponibles
Les langues disponibles
Extra features
Thermostat adjustment
The temperature in the oven has been preset at the factory. When first using the
oven, be sure to follow recipe times and temperatures. If you think the oven is
too hot or too cool, the temperature in the oven can be adjusted. Before adjusting,
test a recipe by using a temperature setting that is higher or lower than the
recommended temperature. The baking results should help you to decide how
much of an adjustment is needed.
The oven temperature can be adjusted ±35 °F (±19 °C).
How to adjust the oven temperature
1.
Press Broil and 1 at the same time for 3 seconds.
The display will show AdJ 0.
2.
Enter the adjustment you want, eg. 20 °F, using the number pad.
You can adjust the temperature so that it is lower than the factory setting by
pressing Broil.
3.
Press START/SET.
NOTE
This adjustment will not affect the broiling temperatures. The adjustment will be
retained in memory after a power failure.
Fahrenheit or Celsius temperature selection
The oven control can be programmed to display temperatures in Fahrenheit or
Centigrade. The oven has been preset at the factory to display in Fahrenheit.
How to change the display from Fahrenheit to Centigrade or from Centigrade to
Fahrenheit
1.
Press Broil and 2 at the same time for 3 seconds.
The display shows F (Fahrenheit) or C (Centigrade).
The default is F.
Press 0 to select F or C.
2.
Pressing 0 changes the display between F and C.
3.
Press START/SET.
NE59K6851SS_AC_DG68-00872A-02_EN+MES+CFR.indb 37
Convection auto conversion feature
When you use the auto conversion feature, the convection auto conversion feature
will automatically convert entered regular baking temperatures to convection
baking temperatures.
If this feature is activated, the display will show the actual converted (reduced)
temperature. For example, if you enter a regular recipe temperature of 350 °F and
press START/SET, the display will show the converted temperature of 325 °F.
How to disable or enable the auto conversion feature
1.
Press Broil and 3 at the same time for 3 seconds.
The display will show Con On (enabled) or Con OFF (disabled).
The default setting is Con OFF.
2.
Press 0 to select Con On or Con OFF.
Pressing 0 changes the mode between Con On and Con OFF.
3.
Press START/SET.
12 hour energy saving
With this feature, should you forget and leave the oven on, the control will
automatically turn off the oven after 12 hours during baking functions or after 3
hours during a broil function.
How to turn 12 hour energy saving feature on or off
1.
Press Broil and 5 at the same time for 3 seconds.
The display will show 12 Hr (12 hour shut-off) or -- Hr (No shut-off). The
default is 12 Hr.
2.
Press 0 to select --12 Hr (Shut off Off) or 12 Hr (Shut off On).
Pressing 0 changes the mode between 12 Hr and -- Hr.
3.
Press START/SET.
English 37
2018-08-29
12:48:26
Publicité
