Cooking areas
•
The cooking areas on your range are identified by permanent circles on the
glass cooking surface. For the most efficient cooking, fit the pan size to the
element size.
•
Pans should not extend more than ½" to 1" beyond the cooking area.
•
When a control is turned on, a glow can be seen through the glass cooking
surface. The element will cycle on and off to maintain the preset heat setting,
even at high settings.
•
For more information on selecting proper types of cookware, refer to the
section "Using the proper cookware" on page 23.
NE59K6851SS_AC_DG68-00872A-02_EN+MES+CFR.indb 21
How to set the appliance for cooktop cooking
CAUTION
•
The surface elements may be hot and burns may occur. Do not touch the
surface elements until they have cooled down sufficiently.
•
At high or medium-high settings, never leave food unattended. Boilovers
cause smoking and greasy spillovers may catch on fire.
•
Be sure you turn the control knob to OFF when you finish cooking.
Surface unit control knob
2
1
Single (Left rear, Right rear)
Push the knob in.
1.
2.
Turn in either direction to the setting you want.
•
Position A : Single burner
•
Position B : Dual burner
CAUTION
The area between the high and off settings is not appropriate for cooking.
2
A
B
1
Dual (Left front, Right front)
English 21
2018-08-29
12:48:23