Publicité
Les langues disponibles
Les langues disponibles
1.4 How to attach and remove the straps
Although only one strap is included in the box, it can be attached and removed easily. The
shorter strap must be placed in the display's top slot, while the longer strap must be placed
in the display's bottom slot. Otherwise, the insertion system may be irreparably damaged.
1. To remove a strap: Hold the strap and carefully slide the metal piece out of its hole.
2. To attach a strap: Hold the strap and insert the metal piece on one end. Then, slide the
metal piece on the other end and insert the end of the strap so that when you let go of the
metal piece it fits into the case hole.
1.5 Charging
-
The Compass smartwatch's full charge time is approximately 2,5 hours and the battery
can last up to 7 days depending on the usage.
-
Use the 45 cm USB-A cable with magnetic charging port that is included in the box to
charge the smartwatch. Connect the USB-A connector to a charger, computer output or
powerbank and place the magnetic port in a way so that it sticks to the 2 silver pins
featured on the back part of the body watch.
1.6 Power on/off
-
To turn on the smartwatch, long press the button.
-
To turn off the smartwatch access the main menu and enter the smartwatch settings.
Once inside, scroll down and tap on the general option. From there, you will be able to
power off and restart the smartwatch.
1.7 About water submersion
The Compass smartwatch has a 2ATM protection rating. It can withstand being submersed
under water 2 meters for up to 30 minutes. Make sure to use the auto-drain function after
submerging it; you will find it in the options menu depicted as a water drop icon.
Note: In case of swimming in the sea or in a saltwater pool, it is recommended to rinse the
watch with fresh water after immersion due to the corrosive effect of salt water.
2. Initial setup
2.1 Download the app
The Compass smartwatch compatible app is called VeryFit. There are several ways to
download it:
- Tap here to download the VeryFit app from Google Play or App Store.
https://apple.co/48psL0o
- You can also download the app directly by typing "VeryFit" in the Google Play or App Store
search engine.
2.2 Register in the app
Registering in the app is very simple.
1. When you access the app accept all the
permissions that may pop up. Then, register:
2. After you register, you will see the next
screen. Tap on get verification code. When
you receive it, type it in:
https://bit.ly/3RyOrBv
(1)
(2)
Publicité
