Toto MS614114CEFG Manuel D'installation page 6

Fill Valve Replacement Procedure (continued)
NO TE: Do not overtighten. These are plastic parts. Never use pipe dope on any
water supply connection.
8)
pipe.
9) Turn water supply ON and check for leaks outside the tank.
NO TE:
Once the
For Type A Fill Valve:
Refer to the water level (WL) setting marked
on the inner wall of the tank. Allow the wa-
clockwise in the (+) direction to increase the
water level height (see Illustration 1). Turn
the adjustment screw counter-clockwise in
the (-) direction to decrease the water level
height. Flush the toilet to verify the correct
water level. Adjust as necessary.
For Type B Fill Valve:
There are no water level adjustments. The
MAINTENANCE INSTRUCTIONS
Water Level Adjustment
Type A
drops will subside.
Type B
Water Level
Ill. 1
6
may drip
Type C
Water
Level
Top of
Tube