Power Supply Battery Operation; Operation With Ac/Dc Power Adaptor - X4-TECH Bobby Joey MP3 Mode D'emploi

Power supply
a. Battery operation
open the battery compartment by loosen the screw on the
cover and remove the cover. Insert 4x 1.5 V Type-C Batteries (not
included in delivery). Make sure to follow the polarity markings
inside the battery compartment. Now put the battery compart-
ment cover back in place and fix it with the screw.
• Never mix old and new batteries.
• Never mix rechargeable batteries with other types of batteries.
• Never mix different types of batteries.
• Always remove used batteries.
• Non-rechargeable batteries must not be recharged.
• Batteries have to be removed before charging.
• Batteries have to be charged under adult supervision only.
• The supply terminals must not be short-circuited.
• Never mix different types of batteries.
• The device must not be connected to more than one power
supply.
b. operation with AC/DC power adaptor
Before connecting the AC/DC power adaptor (not included in
delivery) make sure that the voltage on the label corresponds to
the voltage in your household.
• only use a common power adaptor with 6 V / 600 mA.
• Connect the power adaptor with the DC 6 V jack (see 34.16).
• when the device is powered via a power adaptor, the batteries
will be disconnected automatically.
• power supplies are available in specialized shops.
36
• only use the device with the recommended transformer.
• Equivalent to CE directive 15.
The device must not be connected to more than one
power supply.
wrong usage of the transformator may lead to electric
shock. The transformator used for this toy has to be
checked for damages to the housing, connector, cable
and other parts. If there is any damage, the transforma-
tor must not be used.
If there is any doubt in the safety of this device (e.g.
because of damage to the enclosure, cables, an optional
power adapter or the internal transformer), the device
should not be used until the damage has been properly
removed.
This device may only be connected to a 6 V / min. 600 mA
adaptor with negative pole at the inner conductor of
the plug. The usage of other kinds of power adaptors
may damage the device.
Make sure the power supply plugs polarity corresponds
with the input jacks on the device.
DC 6 V
5 W
37