CLEANING AND MAINTENANCE
•
To ensure long lasting performance clean after each use.
•
Ensure the appliance is switched off and unplugged from the mains.
•
The easiest and most hygienic way to clean the appliance is by rinsing the appliance
head after use with warm water.
DRY CLEANING
•
Press the head release buttons and and pull the head upwards (Fig E).
•
Gently tap out the excess hair shavings and use a cleaning brush to clean out the hair
pocket if necessary (Fig F).
•
Note: Do not use a brush to clean the shaving foils.
•
Replace the head assembly.
WASHABLE CLEANING
•
Press the head release buttons and and pull the head upwards (Fig E).
•
Do not use the brush to clean the foils but blow the shavings out or rinse in running
water (Fig G).
•
Use the cleaning brush to sweep any loose hairs from the cutter and trimmer. Rinse in
running water.
•
Replace the head assembly.
•
Lubricate the teeth of the trimmer every six weeks with a drop of sewing machine oil.
REPLACING THE FOILS AND CUTTERS
•
To ensure continued high quality performance from your shaver, we recommend the
foils and cutters are replaced regularly.
Signs that your foil/s and cutter/s need replacing:
•
Irritation: as foils get worn, you may experience skin irritation.
•
Pulling: as the cutters wear, your shave may not feel as close and you may feel the
cutter pulling your hair.
•
Wear through: you may notice that the cutters have worn through the foils.
TO REPLACE THE FOIL/CUTTERS
•
Press the head release buttons and and pull the head upwards.
•
Fit the new head assembly over the hair pocket and press down to click into place.
BATTERY REMOVAL
•
The battery must be removed from the appliance before it is scrapped.
•
The appliance must be disconnected from the supply mains when removing
the battery.
1.
Pry off the two decorative side panels.
2.
Unscrew one screw from the bottom of the shaver and remove the bottom panel.
3.
Remove the foil assembly and unscrew the 4 screws underneath it.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
7