Loudspeaker Operation - Telefunken Sound Mobile BS 500 Manuel D'utilisation

Description

Loudspeaker Operation

Æ We recommend charging the solar loudspeaker for at
least 2 hours prior to initial use by using the USB cable
included with the scope of delivery (required adaptor is
not included with the scope of delivery, see p. 12).
Æ Self-evidently, the solar loudspeaker may also be char-
ged by using direct sunlight. However, please note the
respectively extended charge time.
Æ In order to switch on the solar loudspeaker, please press
the on/off button. The display will light up green as soon
as the solar loudspeaker has been switched on. Blue-
tooth® connection will be displayed by blue signal.
Æ Now activate Bluetooth® on the output device.
Æ Allow your output device to search for the solar louds-
peaker (M5 + type series number).
Æ Connect both devices. Upon initial connection, you will
be requested to enter a code. Please enter code 2633.
(It is also indicated on the label at the bottom of your
SoundMobile).
Please note: The code request does not apply if the
version of your Bluetooth® connection to the output
device is higher than 2.0.
If you connect the device to the solar loudspeaker later,
you will not have to enter the code again. You will only
have to activate Bluetooth® on your output device and
switch on the solar loudspeaker in order to link both
devices. Successfully established connection will be in-
dicated by a brief acoustic signal.
DE
GB
FR
IT
ES
RU
9