Loudspeaker Operation; Telephone Calls With Sound.mobile - Telefunken MU 802 Mode D'emploi

Description

Loudspeaker Operation

➡
We recommend charging the solar louds-
peaker for at least 2 hours prior to initial use by
using the USB cable included with the scope of
delivery (required adaptor is not included with
the scope of delivery, see p. 13).
➡
Self-evidently, the solar loudspeaker may also
be charged by using direct sunlight. However,
please note the respectively extended charge time.
➡
In order to switch on the solar loudspeaker,
please press the on/off button [1]. The display will
light up green as soon as the solar loudspeaker
has been switched on. Bluetooth connection will
®
be displayed by blue signal.
➡
Now activate Bluetooth ® on the output device.
10
➡
Allow your output device to search for the
solar loudspeaker (M5 + type series number).
➡ Connect both devices. Upon initial connec-
tion, you will be requested to enter a code.
Please enter code 2633.
➡
If you connect the device to the solar louds-
peaker later, you will not have to enter the code
again. You will only have to activate Bluetooth
®
on your output device and switch on the solar
loudspeaker in order to link both devices. Suc-
cessfully established connection will be indica-
ted by a brief acoustic signal.
[1] Press On/Off
[2]
[2] Turn the control in order to
adjust the volume. [1]
Description
➡
When disconnecting your output device
from the solar loudspeaker, please deactivate
the output device's Bluetooth function. The
®
devices' disconnection will be indicated by a
brief acoustic signal. Your SOUND.MOBILE will
switch off automatically when not being con-
nected to any other device for 10 minutes or
longer.

Telephone calls with SOUND.MOBILE

Your SOUND.MOBILE has been equipped with
a particularly convenient call answering func-
tion. If your solar loudspeaker has been con-
nected to your mobile phone via Bluetooth ® and
there is an incoming call while you are listening
to music etc., the music will fade down auto-
matically, and the solar loudspeaker will play the
ring tone.
DE
You can then optionally directly phone via your
SOUND.MOBILE.
➡ With incoming telephone calls, simply press
the telephone button on your solar loudspeaker.
➡
Two high-sensitive microphones and the
speaker installed in the solar loudspeaker enab-
le you to speak and listen to the caller as usual,
without having to hand-hold your mobile phone.
• At the end of the call, the music will be re-
played without the need of making any further
settings.
11
EN FR IT