Operating Instructions
WINE STORAGE
In order to achieve the maximum storage capacity of twenty-eight (28) bottles, it
will be necessary to position the bottles alternately on the upper six shelves, as
shown in Fig. B. This will allow for the storage of four (4) 750ml bottles per shelf in
each of the top six shelves. The bottom can hold an additional four (4) bottles.
SHELVES
Important: Do not cover the gap on the racks with aluminum foil or any other materi-
al that will prevent adequate air circulation within the cabinet.
To remove wine shelves:
1. Fully extend the shelf you wish to remove (Fig. D).
2. Lift the front of the shelf up (Fig. E).
3. Holding the shelf track, push the shelf in, then up to release from the rear dampers (Fig. F).
IMPORTANT
•
The maximum* capacity of the unit is 28 (750ml) wine
bottles.
•
Store wine in sealed bottles only.
*When stocked as per instructions
F
g i
.
D
F
g i
F
g i
.
.
F
7
E