Sharp Plasmacluster IG-A20U Mode D'emploi page 14

PLASMACLUSTER ION GENERATING UNIT REPLACEMENT
In order for Plasmacluster Ions to be released steadily, the Plasmacluster Ion
Generating Unit should be replaced regularly.
Elapsed Time
Beginning to use.
Approx. 2 years.
(approx. 17,500hours)
Approx. 2 years and 2
months.
(approx.19,000hours)
Plasmacluster Ions
are not released.
* Usage environment affects the lifetime of the Plasmacluster Ion Generator.
The Plasmacluster Ion Generator may stop working before estimated lifetime.
In this case, press Operation button again and restart. And clean the electrode section of
the unit. If this does not help, replace with a new Plasmacluster Ion Generating Unit.
Plasmacluster Ion Generating Unit for Replacement
Plasmacluster Ion Generating Unit
Model
IZ-CA20U (for IG-A20U)
Number IZ-CA40U (for IG-A40U)
IG-A20U̲A40U.eng.indd 14 IG-A20U̲A40U.eng.indd 14
Display
Lighting (blue)
fl ashing (red) Lighting (blue)
fl ashing faster (red)
fl ashing (red)
fl ashing (blue)
<For Disposal>
Please dispose the used Plasmacluster Ion
Generating Unit according to any local laws and
regulations.
-materials-
• Case: Acrylonitrile Butadiene Styrene (ABS)
• Unit: Polybuthylene Terephthalate (PBT), Electric
parts.
E-12
Required Action
Suggest replacing
Plasmacluster Ion
Generating Unit.
• Unit has stopped
working.
• Replace the
Plasmacluster
Ion Generating
Unit.
• P r e s s t h e O p e r a t i o n
button and restart.
• Dust may block the fi lter.
• Clean the electrode section
of the unit. If all lights
keep flashing, replace
with new Plasmacluster
Ion Generating Unit. (See
page E-8,9)
2010/09/29 15:31:19 2010/09/29 15:31:19