Ninja Foodi FLEXDRAWER Notice D'utilisation page 8

COOKING IN YOUR AIR FRYER – CONT .
ENDING THE COOK TIME IN ONE
ZONE (WHILE USING BOTH ZONES)
1 Select the Zone you would like to
stop.
2 Press START/STOP to end cooking.
3 "End" will appear on the display.
Cooking will continue in the other Zone.
PAUSING COOKING
Cooking will automatically pause when
the drawer is removed. Re-insert drawer to
resume cooking.
NOTE: If during cooking the drawer is
removed for longer than 2 minutes, the
program will be cancelled. You will need
to re-program to resume cooking.
13 ninjakitchen.eu
COOKING IN A SINGLE ZONE
To turn on the unit, plug the power cord into a
wall socket, then press the power button.
Max Crisp
NOTE: There is no temperature adjustment
available or necessary when using the Max
Crisp function. The temperature is preset
to 240°C
1 Install divider in the middle of the drawer.
2 Install crisper plate in the drawer, then
place ingredients in the drawer, and insert
drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Select
MAX CRISP.
4 Use the TIME arrows to set the time in
1-minute increments up to 30 minutes.
Press START/STOP to begin cooking.
5 When cooking is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients using silicone-tipped
tongs/utensils.
Air Fry
NOTE: The temperature is preset to 200°C.
1 Install divider in the middle of the drawer.
2 Install crisper plate in the drawer, then
place ingredients in the drawer, and
insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Select
AIR FRY using the dial.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
PressSTART/STOP to begin cooking.
NOTE: During cooking, you can remove
the drawer and shake or toss ingredients
for evening crisping.
5 When cooking is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients using silicone-
tipped tongs/utensils.
Roast
NOTE: The temperature is preset to 190°C
1 Install divider in the middle of the drawer.
2 Install crisper plates in the drawer
(optional), then place ingredients in the
drawer and insert drawer in unit.
3 The unit will default to Zone 1
(to use Zone 2 instead, select Zone 2).
Select ROAST using the dial
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press START/STOP to begin cooking.
6 When cooking is complete, the unit will
beep and "End" will appear on the display.
7 Remove ingredients using silicone-
tipped tongs/utensils.
ninjakitchen.eu 14